18-dec-24

 

SWAB RIGS FOR SALE

FOR ADDITIONAL INFORMATION CONTACT MARYANN AT (516) 536 7375 OR EMAIL rigs@sunmachinery.com

 

SWAB UNIT  (Ref#7326Ta) 

Approx 25,000’ of 7/32” braided line, mounted on 2006 Freightliner, approx. 325,000 miles, 23,241 miles, 5K psi lubricators, bops and stuffing box  Price:  $162,500

SWAB UNIT  (Ref#7326Tb) 

Approx 25,000’ of 7/32” braided line, mounted on 2007 Freightliner, approx. 527,000 miles, 23,530 hours, 5K psi lubricators, bops and stuffing box  Price:  $162,500

2007 INTERNATIONAL SWAB RIG  (Ref#3429T) 

Will hold 13,400’ of 9/16” sandline, right angle drive, automatic 6 speed Allison transmission, enclosed operator’s cab with A/C and heat, fully tooled and ready to work  Price:  $205,000

FREIGHTLINER SWAB RIG  (Ref#9883Tb) 

Cooper drawworks with new 9/16” sandline, 18,500’ capacity drum, 45’ derrick from hinge, 120 gal brake water tank, depthometer and weight indicator, heat/air in both cabs, air and mechanical brake drawworks in operator’s cab, air controlled line spooler arm, mounted on 2003 Freightliner FL80 truck, 300 hp Mercedes engine, Allison auto transmission, new tires approx. 116,000 miles, 16,710 hours, fully tooled  Price:  $210,000

FREIGHTLINER SWAB RIG  (Ref#9883Tc) 

Cooper drawworks with new ½” swedge line, 40’ derrick from hinge point approx. 10’ off ground, depthometer and weight indicator and line speed, heat/air in both cabs, air and mechanical brake for drawworks in operator’s cab, 75 gal brake water tank, air controlled spooling arm, mounted on 2007 Freightliner with 450 hp Meredes engine, Allison automatic transmission, new tires, approx. 169,000 miles, 6900 hours, fully tooled with new 2-7/8 BOP  Price:  $265,000

SWABMASTER SWAB UNIT  (Ref#3823Ta) 

Mounted on 2009 International 7400 SBA 4 x 2 truck, 84,000 miles, 3,698 hours, lubricators, oil savers and mandrils, rig will hold up to 18,000’ of line, ¼” diameter of braided line, 38,000 lbs operating mast when properly guided  Price:  $137,500

SWABMASTER SWAB UNIT  (Ref#3823Tb) 

Mounted on 2008 International 7400 SBA 4 x 2 truck, lubricators, oil savers and mandrils, rig will hold up to 18,000’ of line, ¼” diameter of braided line, 38,000 lbs operating mast when properly guided     Price:  $112,500

DA MFG MODEL 280 SWAB RIG  (Ref#4163T) 

Mechanical drawworks, holds 10,500’ of 9/16 swedge line, Mounted on 2007 International truck with extended cab 7400, DT570 engine, 37,744 km, 2796 hours  Price:  $118,500 USD

2007 IHC SWAB UNIT  (Ref#4497T) 

Mounted on 2007 International 7400, 300 hp, Allison automatic transmission, ½” swage line, fully tooled for swabbing, current cvip, maintenance records, ready to work, located Canada  Price:  $112,500 USD

SHOP BUILT SWAB RIG  (Ref#3370T) 

10,000’ – 15,000’ depth capacity, single drum, 10,000’ line (fairly new), mounted on 2002 International tandem axle truck with Cat engine, spare transmission, some tools  Price:  $37,500

1990 KENWORTH SWAB RIG  (Ref#2411Tc) 

Will hold 16,500’ of 9/16” sandline, right angle drive, 8 speed Eaton standard transmission, enclosed operators cab with heat and A/C, tooled, ready to work  Price:  $140,000

WILSON WORKOVER SWAB RIG  (Ref#13398R) 

Wilson Workover Swab Rig

Double drum Wilson Sr and Wilson JR drawworks,  sandline capacity 10000' of 3/16", mounted on tandem axle, 1987 Freightliner tandem axle truck powered by Detroit diesel engine, 2 hydraulic leveling jacks, Detroit diesel on deck, 50' hydraulically raised mast, brand new hydraulic cylinder just replaced for lifting derrick, has pulled a minimum of 3000' wells, all new hydraulics   PRICE:  $147,500

1995 KENWORTH T800 SWAB RIG  (Ref#2550Ta)

Pole rig, Franks drawworks, holds 16000’ of sandline, no cable, no tools, last worked 2021  Price:  $47,500

1991 INTERNATIONAL MODEL 8000 SWAB RIG  (Ref#2550Tb)  Wilson drawworks, 45’ scope derrick, no cable, last worked December 2019  Price:  $83,500

1992 MACK RD600 SWAB RIG  (Ref#2550Tc)  Wilson drawworks, 9000’ cable, 35’ derrick (derrick replaced 2017)  Price:  $113,500

SHOP BUILT CABLE TOOL/SWAB RIG  (Ref#10188)  

Triple drum, friction clutch, cathead (sandline holds 2400’ of 5/8” line), mounted on tandem axle Chevy truck with 427 gasoline engine, 8-5/8” x 45’ single pole, new tires, power steering, wireline unit, good usable rig for shallow oil/gas lease, drills, workover, swab capabilities, no tools  Price:  $112,500 - Oklahoma

1994 INTERNATIONAL MODEL 8100 SWAB RIG  (Ref#2550Td) 

Franks drawworks, 9,000’ of 9/16” cable (may need splice job soon) bottom part of spool still in good shape, 35’ derrick, travelling sheave, tooled up, recently put new flywheel on rig and new rear end, currently working  Price:  $72,500

2002 MACK RD600 SWAB RIG  (Ref#2550Tf) 

Wilson drawworks, Detroit engine on deck, 40’ derrick,  no line (can fit 14,000’ of 9/16”, no tools, parked since 2021, back radiator on Detroit needs a little work (has a small hole), hydraulics need fix on the pump (leak), other than that working condition Price:  $57,500

1971 INTERNATIONAL MODEL 4370 SWAB RIG  (Ref#2550Tg) 

Franks drawworks, 11,000’ of 9/16” cable (will hold 16,000’), 35’ derrick  Price:  $63,500

SLICK LINE UNIT  (Ref#2560T) 

2006 Ford F550, you can operate it from the inside, last worked 2020, needs new wire, crane needs maintenance  Price:  $47,500

1999 DODGE SLICK LINE UNIT  (Ref#2550Th) 

5 speed, Slick line equipment built 2017, tool  Price:  $72,500

2007 DODGE SLICK LINE UNIT  (Ref#2550Tj) 

Cummins engine, 6 speed, Slick line equipment built 2018, tools  Price:  $92,500

SWAB RIG  (Ref#9037Tb) 

Pemco Model 45-30 mast 45’ clear height x 30,000#, 9/16” swab line, mounted on 1977 International Transtar 4300 rebuilt engine, 3 axles, 44,300 GVW  Price:  $162,500

FRANKS 658 SWAB RIG  (Ref#9037Ta) 

Built 1977, Pemco 45-30 mast 45’ clear height x 30,000#, 9/16” swabline, mounted on 3 axle carrier with 6V71 Detroit diesel, Allison 446-2 transmission (has problem, and have new spare), Franks 658 drawworks  Price:  $147,500

SWAB RIG  (Ref#8055T)

Detroit 8V71 engine, 15,000’ of 9/16” line, mounted on 3 axle carrier  Price:  $138,500

SKYTOP BREWSTER SWAB RIG  (Ref#8491T) 

Mounted on 3 axle Crane Carrier, 45’ mast, drawworks has 9” brakes, Detroit 8V engine (runs very well), hydraulic system functions well, oil saver, swabbing mandril  Price:  $72,500

SKYTOP SWAB RIG  (Ref#9037Tc) 

Built 1977, Detroit diesel, 54,000 GVW, needs work  Price:  $50,000

COOPER SWAB UNIT  (Ref#1464T) 

Manufactured 1978, rebuilt 2006, mounted on 1999 Freightliner single telescopic mast, max pull on push load 43,000#, weight indicator, dual tandem drive axles, 8000’ – 10,000’ of 9/16" swab line, Detroit Series 50 diesel engine, Allison auto transmission, 198,000 miles  Price:  $172,500

TCB SWAB RIG MODEL TCB-44-30S  (Ref#4118T) 

Built 2008, 44’ working height, mounted on International 7500 truck, 30,000# single line pull derrick, max hook load vertical 30,000#, maximum hook load slant 8,000#, holds 14,000’ of 1/2" swedge line, Allison transmission, DT570 engine in truck, includes lubricator, saverhead and ratigan BOP  Price:  $195,000 CDN

PUMA WELL SERVICE SWAB RIG  (Ref#7442Ta) 

Manufactured 2004, mounted on 2004 International truck with diesel en gine, 50’ derrick, 2000 hrs on engine, located Canada 

Price:  $60,000 USD
Price unmounted (without truck):  $40,000 USD

HIGH CALIBER WELDING SWAB RIG  (Ref#7442Tb) 

Manufactured 2004, unmounted, large drum, located Canada  Price:  $29,500 USD

MESA SWAB RIG  (Ref#15642T) 

Mounted on 2001 Mack tandem axle truck with Mack diesel engine, right angle gearbox, Mesa drawworks holds 20,000’ of 9/16” sandline, currently has 17,000’ on it, ready to work, tires good  Price:  $144,500

1993 PETERBILT TRUCK WITH SWAB RIG  (Ref#351N) 

Mounted on 1993 Peterbilt truck with 22.5 tires and powered by Cummins L14 diesel engine, 4 hyd leveling jacks, 471 Detroit, Automatic transmission, 45' mast, 16,000' swab line, weight 46,000#, tooling  Price:  $155,000  PRICE REDUCED:  $94,500

FRANKS 200 SWAB RIG  (Ref#7275T) 

53’ mast, Detroit 6V71N engine, Allison transmission, 160 sand drum with 15” double roto hydromatic, new 9/16” line, 14,000’ sandline (can hold 16,500’)  Price:  $162,500

RIGTECH CARRIER MOELLER SWAB UNIT  (Ref#9241R) 

Manufactured 1982, single drum, 42' mast, drum holds 18,000' of 9/16" sandline, Mesa drawworks, V8 Detroit engine, Rigtech carrier, sitting since 2016 PRICE:  $42,500

MOELLER SWAB RIG  (Ref#7324T)  Mounted on 1999 International truck with diesel engine, PTO, Moeller single drum drawworks, 9/16” sandline, sitting since 2020  Price:  $62,500

MOELLER SWAB UNIT  (Ref#6061Ta) 

Built 1980, Detroit engine, automatic transmission, runs good, needs line, will hold 15,000’  Price:  $94,500

WILSON MOGUL 42 SWAB RIG  (Ref#6061Tb) 

Mounted on Ford 8000 truck, Detroit 6 engine, splitter box, will hold 15,000’ (now has approx 5000’)  Price:  $94,500

1986 CHEVY C70 WITH SWAB RIG  (Ref#7353Tb)  28' hydraulically rasied derrick, 9200' of 4/8" stainless sandline, 5 cylinder Mereces diesel engine, mounted on 1986 Chevy C70 single axle truck with 502 gas engine, hydraulic leveling jacks in rear  Price:  $52,500

COOPER SWAB RIG  (Ref#4710Ta) 

Cooper 550 single drum drawworks, 12” brake, 55’ mast, 15,500’ of 9/16” line capacity, mounted on 1996 Kenworth T400 truck with Cummins 350 hp engine, 10 speed transmission, 2 hydraulic leveling jacks, approx 100,000 miles, new bearings and brake bands in drawworks, recently sandblasted and painted, steel was replaced in mast and bed where needed, completely tooled with swab cups, mandrels, weight bars and allnecessary equiment needed to operate Price:  $170,000
Also available:  Trailer mounted 120-140 bbl fiberglass tank

MOELLER SWAB RIG  (Ref#4710Tb) 

Moeller single drum drawworks, 55’ mast, 14,500’ of 9/16” line capacity, mounted on 2003 Kenworth T800 truck, approx 100,000 miles, 2 leveling jacks,  toolbox, new bearings and brake bands in drawworks, recently sandblasted and painted, steel was replaced in mast and bed where needed, completely tooled with swab cups, mandrels, weight bars and allnecessary equiment needed to operate Price:  $170,000 
Also available:  Trailer mounted 120-140 bbl fiberglass tank

SWAB RIG  (Ref#4710Tc) 

Single drum drawworks, 55’ mast, mounted on 1995 Kenworth truck with Cummins 350 engine, 55’ mast, 14,500’ of 9/16” capacity, toolbox, new bearings and brake bands in drawworks, recently sandblasted and painted, steel was replaced in mast and bed where needed, completely tooled with swab cups, mandrels, weight bars and allnecessary equiment needed to operate Price:  $170,000
Also available:  Trailer mounted 120-140 bbl fiberglass tank

SKYTOP SWAB RIG  (Ref#4710Td) 

Single drum drawworks, 55’ mast, mounted on Kenworth T600 with Detroit 60 Series engine, holds 14,500’ of 9/16” line Price:  $85,000
Also available:  Trailer mounted 120-140 bbl fiberglass tank

SKID MOUNTED SPOOLER  (Ref#4710Te) 

Franks drawworks, diesel engine  Price: $19,500

FALCON SWAB RIG  (Ref#7494T) 

Cummins diesel engine on deck, mounted on Mack truck with Mack diesel engine, holds 11,000’ of cable, walking beam, hydraulic extendible mast, sitting since 2023  Price on Request

 

FOR ADDITIONAL INFORMATION CONTACT MARYANN AT (516) 536 7375 OR EMAIL rigs@sunmachinery.com